Sintering Publications

Sintering Publications

1. “Gravity Induced Solid Grain Packing During Liquid Phase Sintering,” Yixiong Liu, Donald F. Heaney, and Randall M. German, Acta Metallurgica et Materialia, v 43, n 4, 1995, p. 1587.
2. “Gravitational Effects on Low Solid-volume Fraction Liquid Phase Sintering,” D. F. Heaney, R. M. German, In Shup Ahn, Journal of Materials Science, v 30, n 22, 1995, p. 5808.
3. “The Effect of Nickel Boride and Boron Additions on the Sintering Characteristics of Injection Molded 316L Powder Using A Water Soluble Binder System,”Halil I. Bakan, Donald Heaney, and Randall M. German, Journal of Powder Metallurgy, v 44, n 3, 2001, pp. 235-242.
4. “Defect-free sintering of two material powder injection molded components Part I Experimental Investigation,” D. Heaney, P. Suri, R. German, Journal of Material Science, vol. 38, 2003, pp. 4869-4874.
5. “Defect-free sintering of two material powder injection molded components Part II Model,” P. Suri, D. Heaney, R. German, Journal of Material Science, vol. 38, 2003, pp 4875-4881.
6. “Modeling of Distortion after Densification During Liquid Phase Sintering,” Chantal Binet, Kara L. Lencoski, Donald F. Heaney, Randall M.German, Met Trans A, Vol. 35A, December 2004, pp. 3833-3841.
7. “Master Sintering Curve Concepts as applied to the Sintering of Molybdenum,” Deborah Blaine, John D. Gurosik, Seong Jin Park, Donald Heaney, Randall M. German, Metallurgical and Materials Transactions A, October 2004.
8. “The PVT Effect on the Final Sintered Dimensions of Powder Injection Molded Components,” C. D. Greene and D. F. Heaney, Materials and Design, July 2004.
9. “Gravity Effect on Critical Volume Fraction in Liquid Phase Sintering,” D. F. Heaney, R. M. German, I. S. Ahn, Advances in Powder Metallurgy and Particulate Materials, v 2, 1993, pp. 169.
10. “New Grain Growth Concepts in Liquid Phase Sintering,” Donald F. Heaney, Randall M. German, Advances in Powder Metallurgy and Particulate Materials, v 3, 1994, p 303.
11. “Control of Component Distortion During Liquid Phase Sintering,” R. Raman, D. Heaney, Randall M. German, Advances in Powder Metallurgy and Particulate Materials, v 3, 1994, p.281.
12. “Gravitational Effects on Solid Grain Packing in Liquid Phase Sintering,” Yixiong Liu, Donald F. Heaney, and Randall M. German, Tungsten and Refractory Metals-1994, 1995, pp. 121-128.
13. “Porous Stainless Steel Parts Using Selective Laser Sintering,” Donald F. Heaney and Randall M. German, Advances in Powder Metallurgy and Particulate Materials, v 8, 2001, p.73.
14. “Effect of Carbide Additions on the Sintering of M2 Tool Steels,” Hoarang Zhang, Donald F. Heaney, and Randall M. German, Advances in Powder Metallurgy and Particulate Materials, v 4, 2001, p.166.
15. “The Effect of Sintering Atmosphere on the Chemistry and Microstructure of Near-Net-Shape Processed Tool Steels,” M. K. Sawford, J. Muha, and D. Heaney, PM2TEC 2002 World Congress, MPIF, v13 June 16-21, p 302, Orlando Florida.
16. “Advances in the Sintering of Titanium Powders”, Donald F. Heaney and Randall M. German, PM2004, Vienna, Austria.
17. “Alloying Effects on the Sintered Density of a Molding Grade of Iron Powder,” A.L. Cardamone, J. Liu, T. Potter, R.M. German, and F. Semel, Advances in Powder Metallurgy and Particulate Materials, 1999, vol. 3, Metal Powder Industries Federation, Princeton, NJ, 1999, pp. 11.61-11.75.
18. “Boron-Enhanced Sintering of Iron-Molydenum Steels,” J. Liu, R.M. German, A. Cardamone, T. Potter, and F.J. Semel, International Journal of Powder Metallurgy, 2001, vol. 37, no. 5, pp. 39-46
19. “Liquid Phase Sintering of Iron-Carbon Alloys with Boron Additions,” J. Liu, A. Cardamone, T. Potter, R.M. German and F. Semel, Powder Metallurgy, 2000, vol. 43, no. 1, pp. 57-61.
20. “Linking Microstructure and Macrostructure During LPS under Gravity,” Wuwen Yi, Donald F. Heaney, Ronald G. Iacocca, Randall M. German, Metal Powder Report, v 55, n 7, 2000, p. 10.
    Back to publications